Tortoise Enclosure Setup

Tortoise Enclosure Setup

Jun 16, 2023
1303

image

So you've decided to adopt or buy your first tortoise; before you take your money out of your pocket, your pocket should already be emptied out from all the materials required to set up the enclosure and you need to wait a few more months of paycheck to afford your pet. =P

I mean, your tortoise's home should have already been set up.

HERE'S HOW

What you need (at the very least):

  • Enclosure: 4x2x2 ft pvc enclosure

  • Heating: 50w Arcadia deep heat projector and thermostat

  • Lighting: 100w Arcadia halogen basking lamp and 24w Arcadia T5 HO D3 + 12% Desert

  • Substrate: 2.5 bags of 24 qt of orchid bark

  • Hides: 2 humid hides

  • Bowls: shallow food and water bowls

  • Basking slate

  • Hygrometers x2

  • Temperature gun

  • Dynaflex 230 DAP sealant

Additional but optional buys:

  • Plants (fake or real but organic)

  • Rocks

  • Wood branch

  • Fogger or mister

Baby tortoises have the best chance of survival when set up indoors for the first few years of their lives. (With my case, my tortoises will be living indoors for most of their lives)

Setting up the enclosure:

  1. First thing to do is to assemble your pvc enclosure, if it didn't come already built. Ensure to seal the joints with Dynaflex 230 sealant (it is animal safe) and let it dry out for 2 hours and air out the smell for a day. The sealant would prevent any liquid/moisture from seeping out of your enclosure. Use an animal-safe disinfectant to sanitize your enclosure.

  2. The heating and lighting elements should be secured properly on the top panel to avoid any fire hazard and animal injury. To create a thermal gradient from the cool and warm side, affix your basking lamp and heat projector on each end of the enclosure. The UVB strip light should be in between the two lamps.

  3. The substrate or bedding for your tortoise should be about 2-3 inches deep. Although leopard and Indian star tortoises do not burrow, they love to dig themselves a shallow, cozy spot.

  4. In the warm side of your enclosure, secure the slate directly below your basking lamp and place one hide near the basking area. You can also add fake plants to create a shade for your tortoise as they love to also bask under shades. In addition, place one of the shallow bowls near the basking site as it will help with increasing the humidity and will also encourage your tort to have a nice warm soak. A lot of keepers prefer the water bowl to be on the cooler end to reduce evaporation (never have the water in my enclosure fully (or even half) evaporate within a day, just fyi) and therefore to reduce humidity (if that is your goal). Place one of the hygrometers by the basking spot to track the temperature and humidity in that area (ensure the hygrometer is near the substrate level).

  5. In the cool side of your enclosure, secure a hide in the coolest spot, usually the very back-end corner of the enclosure. When your tortoise is ready to cool down, this side is where they will be, and the hide will provide them with a nice comfy spot. The cool side is also where you will place their food bowl when feeding to avoid toasting their salad =P. Don't forget to secure a hygrometer on this side.

  6. You can decorate your enclosure with plants to provide them with more security and cover. When taking your tort home for the first time, they will likely not eat and will only think of hiding (to survive from us, the unknown). Giving them different places to hide gives them a sense of security, which I believe one of the most important aspects of the socialization process.

  7. You can also add rocks and wood branches slightly depressed into the substrate to give them enrichment. Providing them with different ground textures also allows for their curiosity to kick in and little areas to climb (which they love to do) will help with the healthy development and strength training of their legs.

  8. Once all the set up and decoration is completed. Close your enclosure and allow for your temperature and humidity to set in (usually about 30 minutes). Then, use your temp gun to accurately check the temperatures in the basking spot and in the cool end of the enclosure. The humidity should be consistently at around 80% RH especially for hatchling and baby tortoises. Naturally in the hot side of the enclosure, the humidity will be lower and in the cooler end, higher. The cool side should always have at least 80% RH and can start to lower to at least 70% RH from hatching to baby.

  • Basking temp: 95-115 F

  • Warm side temp: 85-90 F

  • Cool side temp: 80-85 F

  • Nighttime temp: 80-83 F

There you go! You should be ready to finally house your new tort. Remember, give them time to adapt to their new environment and a good start is to not handle them unless you need to (ex. during soak).

Good luck with your care and as always, feel free to ask any questions!

Gefällt dir dieser Beitrag?

Kaufe tortallyscute einen cactus pad

Mehr von tortallyscute