Schreitpanzer IV Version 8 Action Figure

The model is free for personal use but you can also support me via donation here or PAYPAL: [email protected]

A 3D printable STL file of the Schreitpanzer IV action figure. The joints are version 8 which use polyurethane tube to produce friction. The joint files are provided with 0.47 and 0.48 cm. linkage so you can choose what works for your printer and material(s) 

The model is optimized for both FDM printer and resin prionter. Do avoid using soft plastic like PLA or you may damage the joints.

 What you need for this project:
- Cyanoacrelate glue (superglue) 
- 0604 Polyurethane tube, also known as 6 mm. fish tank oxygen tube.
- Files and sandpaper 
- Cardboard cutter for the PU tube.

* Do try to hollowed out the torso by allowing for 2 mm. wall thickness and make proper drains using your slicer software. A top heavy mech does not pose very well. 

* The model is provided with no tolerance allowed. Expect to do a bit of filing and sanding for the parts o fit together. 

* Please observe the assembly manual provided. Print out the joint housing and dumbell linkage first so you can test fit your joint assembly.