H3S-Dev V1 is the successor to the H2S-Dev V1.2 — same credit-card footprint and mounting holes, with upgrades across the board. Here's what changed.
What's new
- Processor: ESP32 → ESP32-S3 with 8 MB PSRAM
- Radio: SX1276 → SX1262 with power amplifier (Ra-01SH-P)
- Programming: no external adapter needed — USB-C goes straight to the ESP32-S3's native USB, plus BOOT and RESET buttons
- Power: new second input for a solar panel, alongside USB-C and LiPo, each with its own sensing
- Prototyping: soldering area grows from 32 to 67 holes
- Design files: moved from Altium CircuitMaker to KiCad
What stays the same
- 85 × 56 mm credit-card size with Raspberry Pi mounting holes
- LiPo charging, GNSS, two I2C ports
- Open source hardware under the MIT license
H3S-Dev is now in pilot production.
H3S-Dev V1 (new): https://github.com/hobbyiot/H3S-Dev-V1
H2S-Dev V1.2 (previous): https://github.com/hobbyiot/LoRa-Nodes
This project is sponsored by PCBWay.
#meshtastic #lora #esp32s3 #opensourcehardware #kicad
