Discovering water leaking from your boiler can be worrying. Whether it’s a small drip underneath the unit or a steady flow of water, a leaking boiler should never be ignored. Even a minor leak can reduce your heating system’s efficiency, increase energy bills, damage your property, and lead to costly repairs if left untreated.

A boiler leaking water isn’t always a sign that you need a complete replacement. In many cases, the issue can be repaired quickly by a qualified Gas Safe engineer. The key is identifying the cause early before the problem becomes more serious.

In this guide, we’ll explain the most common reasons your boiler may be leaking, what you should do if you notice water, the average repair and new boiler installation costs, and when it’s time to contact the experts at G and K Heating.

Common Causes of a Boiler Leaking Water

Boilers are made up of numerous components that work together to provide heating and hot water. Over time, wear and tear, pressure issues, or ageing parts can cause leaks to develop. Understanding the source of the problem is the first step towards an effective repair.

Boiler Leaking from the Pressure Relief Valve

One of the most common causes of a boiler leaking from the pressure relief valve is excessive pressure inside the system. The pressure relief valve is an important safety feature designed to release water when the internal pressure rises above safe levels.

If you notice water dripping from a copper discharge pipe outside your home or near the boiler, the pressure relief valve may be releasing excess pressure. This can happen because of an overfilled heating system, a faulty filling loop, or a failed expansion vessel.

While topping up boiler pressure is something many homeowners can do themselves, persistent pressure problems should always be investigated by a qualified engineer. Simply resetting the pressure without fixing the underlying cause is only a temporary solution.

Corroded Components

Like any mechanical appliance, boilers naturally deteriorate with age. Continuous exposure to heat and water can eventually cause internal components to corrode. The heat exchanger, valves, seals, and pipework are particularly vulnerable in older boilers. As corrosion develops, tiny holes or weakened joints may begin to leak.

If corrosion is limited to one component, a repair may be sufficient. However, if several parts have deteriorated, replacing the boiler may offer better long-term value and improved efficiency. Many homeowners also choose to discuss boiler installation Hayes services when an older system reaches the end of its lifespan.

Boiler Dripping Water from a Pipe

Many homeowners search online for boiler dripping water from a pipe, believing the boiler itself has failed. The leak could be coming from one of several connected pipes rather than the appliance itself.

The water may be escaping from the condensate pipe, overflow pipe, heating flow or return pipes, or safety discharge pipe. In some cases, a pipe connection has simply become loose over time due to the expansion and contraction of the heating system.

Although tightening a connection might sound straightforward, it is always advisable to have pipework inspected by a professional to ensure the leak isn’t being caused by internal damage or corrosion.

Faulty Pump Seal

The circulation pump is responsible for moving hot water around your central heating system. Over time, the seals surrounding the pump can wear out, allowing water to escape underneath the boiler.

You may notice a small pool of water beneath the appliance or hear unusual noises coming from the pump. Heating performance may also decline as the pump becomes less effective. Fortunately, replacing worn pump seals is usually a relatively straightforward repair when carried out by a Gas Safe engineer.

Loose Connections and Worn Seals

Your heating system expands as it warms up and contracts as it cools down. This repeated movement can gradually loosen fittings and joints over many years of use. Even a tiny gap around a connection can allow water to drip slowly.

While the leak may seem insignificant at first, continuous dripping can eventually damage nearby components or flooring. Similarly, rubber seals and washers naturally wear out over time. Replacing these parts early can prevent larger repairs later.

Cracked Heat Exchanger

The heat exchanger is one of the most important parts of any boiler, transferring heat from the burner into the water that circulates your home. Unfortunately, it is also one of the most expensive components to replace.

A cracked heat exchanger can lead to persistent leaks, pressure loss, poor heating performance, and unusual metallic sounds from inside the boiler. Depending on the boiler’s age and condition, replacing the entire appliance may be more economical than fitting a new heat exchanger. Experienced boiler installers in London can advise whether repair or replacement is the better long-term option.

What Should You Do If Your Boiler Is Leaking?

If you notice water around your boiler, follow these simple steps:

1. Turn Off the Boiler
Switch off your heating system to prevent further damage.

2. Shut Off the Water Supply (If Safe)
If water is leaking heavily, isolate the boiler if you know how to do so safely.

3. Check the Pressure Gauge
Normal boiler pressure is usually between 1 and 1.5 bar when the system is cold.

If the pressure is much higher, this could explain why the pressure relief valve is releasing water.

4. Dry the Area
Remove standing water to protect flooring, electrical components, and nearby furniture.

5. Call a Gas Safe Engineer
Never attempt to dismantle or repair a boiler yourself.

A qualified engineer can safely diagnose and repair the problem while ensuring your heating system remains safe to use.

Average Boiler Repair Cost in the UK (2026)

One of the first questions homeowners ask after discovering a leak is, “How much will it cost to repair my boiler?” The answer depends on the cause of the leak, the boiler’s age, and whether replacement parts are required.

In the UK, repair costs typically range from £80 to £900, while a new boiler installation generally costs between £1,800 and £3,500+. If your boiler is older and requires frequent repairs, replacing it with a new energy-efficient model may be the more cost-effective option.

Although some repairs are inexpensive, repeatedly fixing an older boiler may not be the most cost-effective option. If your boiler is more than 10–15 years old and requires frequent repairs, investing in a modern, energy-efficient replacement could save money in the long run through lower energy bills and fewer breakdowns.

How to Prevent a Boiler Leak

Regular maintenance is the best way to avoid unexpected breakdowns and costly repairs. Here are some practical ways to keep your boiler in good condition:

1. Book an Annual Boiler Service

A yearly service allows an engineer to inspect seals, valves, pipework, and internal components before minor issues become major repairs.

2. Monitor Boiler Pressure

Check the pressure gauge every few weeks. Pressure that is consistently too high or too low often indicates an underlying problem.

3. Watch for Early Warning Signs

Don’t ignore:

Small water drips
Rust around the boiler
Unusual noises
Reduced heating performance
Frequent pressure loss

Addressing these symptoms early can prevent more expensive repairs later.

4. Bleed Your Radiators

Air trapped in your heating system can affect pressure and reduce efficiency. Bleeding radiators helps maintain balanced heating.

5. Choose Professional Repairs

Only use a Gas Safe registered engineer for boiler repairs and servicing. Professional maintenance ensures your boiler remains safe, efficient, and compliant with UK regulations. Choosing a trusted company such as G K Plumbing and Heating gives you added peace of mind.

Why Choose GK Heating?

When your boiler starts leaking, you need a heating engineer you can trust. At GK Heating, our Gas Safe registered engineers deliver fast, reliable boiler repairs with honest pricing and quality workmanship. Many homeowners searching for G&K Heating choose us because of our reputation for dependable service and customer satisfaction.

Here's why customers choose GK Heating:

Gas Safe registered engineers
Fast boiler diagnostics and repairs
Transparent pricing with no hidden costs
Emergency boiler repair services
Regular boiler servicing
Boiler servicing and maintenance
Energy-efficient boiler installations
Friendly, professional customer service

Contact our friendly team today for expert boiler repairs, servicing, or a new energy-efficient boiler installation.

Whether your boiler has recently developed a leak or you simply want to prevent future problems, regular servicing makes all the difference. Visit our Boiler Service & Gas Safety Checks page to see how our experienced engineers can help protect your home.

Follow GK Heating

À propos GK Heating

GK Plumbing and Heating offers tailored renewable energy and heating services across West London. We combine modern technology with expert workmanship to deliver lasting comfort and efficiency.