Hello everyone.. so for this week i have made a combo of Batman and holloween themed project.. since i'll be entering the holloween contest on makerworld too..
The first one is the Batsignal candy dispenser.. I used my old batsignal model and turned it into a candy dispenser..
The batsignal still have the glow light using the white LED strips.. the top of the batsignal can be open as a cap and add candy inside of it.. i tested it using skittles and M&M peanut.. the size fits into the rotating chamber that dispense it.. i believe jelly beans should also fit in the chamber..
the whole batsignal body is printed seperately so you can choose whichever color for each part of the body.. i'll include the assembly instructions on instructables and makerworld too.. i used black.. yellow and silver for this batsignal.. i used yellow as my main color cause i didnt have enough filament of the other color to use as the main color.. I'll share the files for the project tomorrow on makerworld as well as my merchant google drive..
Next holloween project is also a candy dispenser.. and this time its a live size human skull candy dispenser..
I designed it slightly cartoony since its life size skull.. the top of the skull can be open to add in the candies.. in order to dispense the candy.. all you have to do is push his left eye in.. the candy will be dispense in his mouth.. the jaw can be open to get the candy..
here's my kitten bubu pointing where the candy comes out.. the top skull is held using magnets to keep it close and the candies secure.. i only used 3 color this model.. white.. black and red..
this files will be shared on makerworld together tomorrow with the batsignal..
Both dispenser will use 5mm magnets as well as 12mm x 70mm long compression spring.. only the batsignal have additional LED light strips to light up..
Another project i'll be sharing is a MOD for the A1.. the idea for the MOD for the A1 came a week ago.. To celebrate my 10k follower on makerworld as well as my birthday next month.. my birthday is 3 days before holloween.. Bambu Lab has graciously present me with a X1c combo printer.. So i started looking for a AMS riser to put on top of the X1c.. so i found this one design that i liked that had drawers as well as a lid holder.. it was awesome..
So after i finished it.. i looked at my A1 and thought i should look for the riser/drawer too.. i searched on makerworld and printable.. and no one has made one yet.. so i took some measurements of my A1 and design a riser and drawer for the printer..
It raises the printer about 90mm++.. it has 2 drawers in front and 2 optional drawers on the each side on the back.. it also have 2 bedplate holders.. and i will also be sharing this version on makerworld..
I also made a 2 LED versions of the A1 drawer/riser.. a single button to turn on off the LED lights strip on the A1.. and a dual version that also have led to light up the drawers..
The LED versions will be free and shared to all my supporters/followers but will be sold for everyone else who wants to print the LED version.. i'll be selling it here on my buymeacoffee shop.. i'm selling them cause i spent 4 roll of filaments trial and error to test print the riser/drawers.. and i need to recoup some of that loses..
Anyway that's all i have for this week.. i hope you'll have fun 3d printing the new projects..