This mounting system allows you to securely attach two Honeycomb Storage Wall panels to the sides of your HDRY System when a Snapmaker U1 or a Sanpmaker with drawer or a Snampmaker with Drawer and Spoolbox and Pod are installed on top.

Note: The installation of the top frame is performed in the same way as described in the standard HDRY System assembly manual starting from page 46.

📦 What You'll Get

✔️ Ready-to-print .3MF files, fully optimized and tested for Orca Slicer

✔️ Detailed step-by-step assembly instructions

✔️ Direct support from the designer whenever you need assistance

Designed for easy printing, hassle-free assembly, and a clean, professional-looking setup.

🙏 Credits & Acknowledgments

This HDRY upgrade is inspired by the amazing Honeycomb Storage Wall project created by @RostaP and released under the Creative Commons Attribution-NonCommercial 4.0 license.

Full credit for the original Honeycomb Storage Wall design goes to @RostaP. The files included in this package contain only the HDRY-specific mounting components and custom-sized honeycomb rails developed to seamlessly integrate the system with HDRY.

Please note that the original Honeycomb accessories, mounts, and standard wall components are not included. These can be downloaded directly from the original project page:

https://www.printables.com/model/152592-honeycomb-storage-wall

A huge thank you to @RostaP for creating and sharing such a fantastic project with the maker community. If you enjoy this upgrade, please consider visiting the original project page and showing your support.

HDRY System - X1C- P1P- P1S - Drawer HPV - Support for Honeycomb Storage Wall