
MeKaBuの後継機として、モジュール式キーボード「Modula」を開発しています。MeKaBuのモジュールを再利用できる構成を引き継ぎながら、新しいモジュールも開発しています。
今回は、その中から新規開発品5点を写真とともに紹介します。一覧画像にある01〜05は、すべて新規開発品です。
01|19mm低背トラックボールモジュール
19mmのボールを使った、低背のトラックボールモジュールです。写真はModula本体への装着例です。
02|マウスユニットモジュール
左右クリック・中クリックと、スクロールエンコーダーをまとめたモジュールです。
03|11mmステンレストラックボール+エンコーダー
11mmのステンレス球を使った、トラックボール+エンコーダーのモジュールです。掲載写真は、銀色の球体付きモジュール単体に絞っています。
参考:11mmステンレストラックボール+エンコーダー(BOOTH)
04|センタープッシュ付きLR回路付きエンコーダー
センタープッシュとLR回路を備えたエンコーダーモジュールです。写真は本体への装着例です。
05|LED透過光付きアルチザンキーキャップ用モジュール
アルチザンキーキャップ向けの、LED透過光付きモジュールです。写真はキーキャップを装着していない状態です。
Modulaのオープンソース公開について
Modula本体の設計データとZMKのビルド設定をGitHubで公開しました。ハードウェア設計には、左右の本体基板のKiCadデータ・製造用出力と、筐体のSTEP・3MFを収録しています。ZMK設定には、ビルドと書き込みの手順を掲載しています。新規開発モジュール5点の設計データは今回の公開範囲外です。収録範囲と利用条件の詳細は、各リポジトリの案内をご確認ください。
開発の進捗は、このページやXで随時紹介していきます。いただいたご支援は、部品の購入、基板・筐体・機構の試作、動作検証、公開資料の整備などに活用します。
支援は開発活動への任意の応援です。製品の購入・予約や、個別の技術サポート、完成時期の保証は含まれません。フォローやシェアでの応援もうれしいです。
English summary
Modula is a modular keyboard developed as the successor to MeKaBu. It can reuse MeKaBu modules while adding newly developed options. This post introduces five new modules: a 19 mm low-profile trackball; a mouse unit with left, right, and middle clicks plus a scroll encoder; an 11 mm stainless-steel trackball plus encoder; a center-push encoder with an LR circuit; and an artisan-keycap module with LED light transmission.
The photo for module 03 shows only the silver-ball module itself. I published Modula’s hardware design files and ZMK build configuration on GitHub. The hardware repository includes KiCad files and manufacturing outputs for both main PCBs, plus STEP and 3MF files for the case. The ZMK repository includes build and flashing instructions. Design files for the five newly developed modules are outside the scope of this release. See each repository for details. Optional support helps fund prototyping, testing, and documentation. Thank you for following the project!
