K3RM1T Exoskeleton (Version 6 frame)
This model will fit any reasonably sized 1:24 human figure inside (7.5 cm standing) I used Kotobukiya's Frame Arms pilot as a base.
...............................
STL files here:
3D printable STL here:
https://drive.google.com/drive/folders/1rMGvKjF4IIlC-EAAF_8ysFQQC6EDjhsr?usp=sharing
All Weapons STL here:
https://drive.google.com/drive/folders/1YYDwbmU40LLaLOjtGS89L19NyxPDsqIe?usp=sharing
..............................
The model is a 3D printable action figure. It will require:
- Superglue (Cyanoacrelate)
- M3 nuts and bolts in 10 mm. (used in most parts),15 mm. and 20. mm
...............................
NOTE:
- Internal structure should be printed as SOLID using PETG or ABS
- Outer parts can be printed by anything
- Duplicated parts will only have ONE file. You will need to print out copies yourself
- Hex socketed bolt work best, but feel free to try flat or Phillips
- MOST parts should print fine on FDM printer with minimal support
- Scaled up or down the print will make the model incompatible with M3 bolts