Arduino Distance Measurement System and LabVIEW API
Free
12 people bought this
Overview
This zip file provides a comprehensive tool for integrating an Arduino-based distance measuring system with LabVIEW. The project showcases how to use multiple ultrasonic sensors connected to an Arduino to measure distances in real-time, interfacing seamlessly with LabVIEW for data acquisition and monitoring. This project is designed for educational purposes and serves as a practical example of building a DAQ-like interface using LabVIEW and Arduino.
Features
- Arduino-LabVIEW Integration: Seamlessly interface between Arduino and LabVIEW using serial communication, enabling real-time data acquisition and control.
- Multiple Sensor Support: Easily configure and measure distances using multiple ultrasonic sensors connected to an Arduino, simulating parallel measurement.
- State Machine Structure: The Arduino code employs a robust state machine design that follows the "open-configure-run-close" structure typical of LabVIEW applications, ensuring smooth operation and easy control.
- Dynamic Configuration: Adjust measurement delays and start/stop measurements directly from LabVIEW, providing flexibility and control over the measurement process.
- Real-Time Data Visualization: Use LabVIEW to visualize the distance measurements in real-time, making it easy to monitor changes and analyze data.
Dependencies
- Arduino IDE - Required to upload the firmware to the Arduino microcontroller.
- LabVIEW by National Instruments - Platform for developing and running virtual instruments and acquiring data from the Arduino.
- NI VISA - Necessary for serial communication between LabVIEW and the Arduino.
Installation and Setup
Arduino Setup:
- Download and install the Arduino IDE.
- Upload the provided Arduino firmware to your Arduino microcontroller.
LabVIEW Setup:
Ensure LabVIEW is installed and configured to use NI VISA for serial communication.
Download and extract the provided zip file containing the LabVIEW project.
Open in LabVIEW:
Open the LabVIEW project file to access the example VIs.
Open and run BasicExample.vi
Run the System:
Use the LabVIEW interface to initialize the Arduino, set the measurement delay, and start collecting data from the ultrasonic sensors.
Disclaimer
Non-Product Disclaimer: This tool is provided "as is" without any warranties or guarantees. It is not a commercial product and is intended for educational and example purposes only. The author does not provide support, upgrades, or bug fixes. Use at your own risk.
Acknowledgements
Special thanks to the Arduino community for their extensive resources and contributions to open-source hardware, and to the National Instruments team for providing a robust platform in LabVIEW that allows for seamless integration with external tools.
Free
12 people bought this
Enter a fair price
€
Free